Projection Close 3/28
To do this evening/ was completed:
Presentation Issues: The bulb in theater 7 shut off twice during the trailers for the last round due to a ballast communication failure. I turned the lamp back on via the touch panel each time and everything remained functional for the duration of the show after my final attempt at striking the bulb. I also checked on the crawl space and nothing looked out of the ordinary up there (rear projector lights were glowing green, as were all the status icons on the touch panel) but to be safe I unplugged and rebooted the projector once the lamp cooled down following the show [update: another ballast communication failure alarm showed up again as the lamp was cooling...did not have any effect on the reboot...all lights are green but please check on the system status tomorrow morning to see if any failures occurred overnight]
Preshow Clips/Playlist:
Trailer Updates:
Special Events/ AV set up:
Ordering/Receiving (posters & trailers):
Ordering/Receiving (content): Ninja 3 was delivered and brought to booth 1
Outgoing/Shipping (content):
Print/video Inspection: Finished inspecting Ninja 3 this evening and placed the print back on its shipping reels (tails out) for its screening next month + uploaded stills to the shared drive
Asset tracking doc updated/checked?:
Maintenance/cleaning:
Cue sheets updated/checked (every shift):
Marquee updated?:
Posters updated?:
Cleaning lights on for the night?:
Projection cart by entrance?:
Additional Notes: Updated the dry erase board in 4/6 with upcoming first run titles
Presentation Issues: The bulb in theater 7 shut off twice during the trailers for the last round due to a ballast communication failure. I turned the lamp back on via the touch panel each time and everything remained functional for the duration of the show after my final attempt at striking the bulb. I also checked on the crawl space and nothing looked out of the ordinary up there (rear projector lights were glowing green, as were all the status icons on the touch panel) but to be safe I unplugged and rebooted the projector once the lamp cooled down following the show [update: another ballast communication failure alarm showed up again as the lamp was cooling...did not have any effect on the reboot...all lights are green but please check on the system status tomorrow morning to see if any failures occurred overnight]
Preshow Clips/Playlist:
Trailer Updates:
Special Events/ AV set up:
Ordering/Receiving (posters & trailers):
Ordering/Receiving (content): Ninja 3 was delivered and brought to booth 1
Outgoing/Shipping (content):
Print/video Inspection: Finished inspecting Ninja 3 this evening and placed the print back on its shipping reels (tails out) for its screening next month + uploaded stills to the shared drive
Asset tracking doc updated/checked?:
Maintenance/cleaning:
Cue sheets updated/checked (every shift):
Marquee updated?:
Posters updated?:
Cleaning lights on for the night?:
Projection cart by entrance?:
Additional Notes: Updated the dry erase board in 4/6 with upcoming first run titles
Comments
Post a Comment