NPP Projection Admin 11/18

To do this evening/ was completed: Looked at Barry Lyndon and Btwixt, volumes and lights up put in playlists. 1.66 lens file slightly keystoned in T2, Alec said he'd tweak it tomorrow. **Did not look at Goodfellas, so check on that tonight or tomorrow morning.**

-I sorted the 1.66 lens file for T2. It just needed a tiny bit of cropping at the bottom corners and to be zoomed in, it's now perfectly flush with the masking -A

Zootopia and Eternity playlists built and scheduled.

Ran loop on on P2 for tonight's show. P1 projector cleaned before this afternoon's Bugonia screening, which went...

11/28 forecasts/trailer list hasn't come in yet so not able to schedule 11/28 - 12/4 yet.

Presentation Issues:

Preshow Clips/Playlist:

Trailer Updates:

Special Events/ AV set up: For Trivia tonight, Blank Check podcast is joining and they want to plug into our mixer to record audio. I've got this set up, there are two XLR cables under the AV bench in Trees. They are bringing a Zoom recorder, so these will both plug right in and they'll be able to record the audio from the mics and laptop. No additional setup needed. -A

Ordering/Receiving (posters & trailers):

Ordering/Receiving (content):

Outgoing/Shipping (content):

Print/video Inspection:

Asset tracking doc updated/checked?:

Maintenance/cleaning: I adjusted the channel alignment on the T1 CP750. Mostly bringing the LFE channel down some, and matching the left and right channels better. -A

Masking is set for Bugonia in T7. Remember that in 3 and 7, we can program stops to the 4th button, but this button is not connected to the relay board in the booth so you can't make automation cues with it. 
This gives us a maximum of 6 presets which we can automate in these rooms. We should keep Scope, 2.00, 1.85, 1.78, and 1.66 permanently set and leave the last preset as a variable one which we reprogram as needed. I saved Bugonia 1.5 masking to buttons 2 and 3. This was in use for a 1.66 cue, but I deleted that cue. Not sure when it was made. Going forward, this should be the "variable ratio" preset. It will make it less complicated if we have a cue and motor preset which are designated as variable so we just have to reprogram that preset on the motor as needed and we don't touch the cue. For now, I have 1.66 masking saved to button 4 (which can't be automated) as we're not using it in 7 right now. Buttons 1 and 2 are set to 1.33, which we need for Die My Love. This preset is activated by the "masking 137 or 166" cue. After tomorrow night, we'll need 1.66 back for Jay Kelly. On Thursday, I will adjust things in 3 and 7 to be like what I described above. -A

Cue sheets updated/checked (every shift): Yes cues for the next two weeks are done apart from some specific rep titles that still need specifics and event memos. 

Marquee updated?:

Posters updated?:

Cleaning lights on for the night?:

Projection cart by entrance?:

Additional Notes: