NPP Projection Close 8/9
To do this evening/ was completed: Basically just Odyssey 35mm tonight. Both shows went smoothly but there were some projector issues.
The first issue was a bit of a darkening across the bottom of the screen. Will ran loops after Citizen Ruth and was having issues with darkness on the sides of the screen so he loosened the lens collar knob inside the projector, but this caused the bottom of the image to darken:
What you see is not the frame line creeping up at the bottom: framing was correct.
What you see is not the frame line creeping up at the bottom: framing was correct.
Tightening that lens collar knob seemed to diminish the issue significantly but did not fully get rid of it. I tried to adjust the other lens knob above the lens that shifts the picture horizontally but this didn't do anything.
The second issue of the night was me noticing toward the end of the first show that the roller at the bottom of the projector was not spinning at all. I could see that the film was cutting into the inside of the roller, creating a groove that the film was nestling inside of. You can see the cuts in the second picture below, on the left side of the roller.
I went through my threading path videos of Wednesday 8/5 shows and it looks like those shows also had the same issue, the same roller remaining stationary, not spinning. I tried to apply some WD-40 to the metal spindle per Alec's instruction but that didn't help really. Could be that it just wasn't enough. I was about two minutes away from showtime. Alec told me this roller will have no impact on the image itself--and I made sure to check the film repeatedly as it moved toward the take-up platter: no scratching whatsoever--but that it can wear on the digital soundtrack over time if we don't get it to spin. To my eye the soundtrack area of the film strip isn't really coming into contact with the roller right now but still obviously needs to be fixed. Cleaned projectors at end of the night.
Presentation Issues:
Preshow Clips/Playlist:
Trailer Updates:
Special Events/ AV set up:
Ordering/Receiving (posters & trailers):
Ordering/Receiving (content):
Outgoing/Shipping (content):
Print/video Inspection:
Asset tracking doc updated/checked?:
Maintenance/cleaning:
Cue sheets updated/checked (every shift): Yes
Marquee updated?:
Posters updated?:
Cleaning lights on for the night?:
Projection cart by entrance?:
Additional Notes:





Comments
Post a Comment