NPP Projection Close 8/3
To do this evening/ was completed: Began inspecting The Fifth Element print. So far the print is in good condition, with a decent amount of base scratching. The first reel has printed and scribed cues on the same frames, but the second reel has scribed X marks for the motor and changeover cues, then about eight frames later (for both motor and changeover) there's a set of printed cues and a set of scribed cues, which should be disregarded as they're positioned too late on the reel.
Went over 35mm projection procedure with McKegg in each of the booths. We reviewed threading pretty thoroughly, went over how to turn each projector on, how to adjust framing and focus, how to rotate lenses in the turret, how to make sure the CP500 has the right projector selected at the beginning of a show. I also made him aware of moving the switch to "open" on the exhaust pipes connected to each projector.
We also reviewed the TMS/IMS interfaces, how to ingest content locally, how to upload keys, how to use the quick controls for macro execution. After that we got everything ready for STB.
Presentation Issues: When the Mediablock HDMI playlist started in T1, the dowser opened and projected a blue wash on the screen. I went into Splashtop and then VNC to close the dowser, which did nothing to cut the image. I toggled back and forth between open and close but the Christie seemed to remain unresponsive. I did not attempt to close the dowser on the touch panel in T1.
Presentation Issues: When the Mediablock HDMI playlist started in T1, the dowser opened and projected a blue wash on the screen. I went into Splashtop and then VNC to close the dowser, which did nothing to cut the image. I toggled back and forth between open and close but the Christie seemed to remain unresponsive. I did not attempt to close the dowser on the touch panel in T1.
STB host Michael's laptop also was not functioning properly initially. When we connected the HDMI cable, his laptop registered the connection but we weren't getting an image on screen. I connected the projection laptop to the HDMI and got picture immediately. He ended up restarting his laptop and the issue was resolved.
Preshow Clips/Playlist:
Trailer Updates:
Special Events/ AV set up: STB setup and event went smoothly. All 4/6 equipment brought back to 4/6. Lightboard returned to T1, wireless mic XLR reconnected to the CP750.
Ordering/Receiving (posters & trailers):
Ordering/Receiving (content):
Outgoing/Shipping (content):
Print/video Inspection:
Asset tracking doc updated/checked?:
Maintenance/cleaning:
Cue sheets updated/checked (every shift): Yes
Marquee updated?: Yes, put up letters for Bullet Train.
Posters updated?:
Cleaning lights on for the night?: Yes
Projection cart by entrance?: Yes
Additional Notes:
Preshow Clips/Playlist:
Trailer Updates:
Special Events/ AV set up: STB setup and event went smoothly. All 4/6 equipment brought back to 4/6. Lightboard returned to T1, wireless mic XLR reconnected to the CP750.
Ordering/Receiving (posters & trailers):
Ordering/Receiving (content):
Outgoing/Shipping (content):
Print/video Inspection:
Asset tracking doc updated/checked?:
Maintenance/cleaning:
Cue sheets updated/checked (every shift): Yes
Marquee updated?: Yes, put up letters for Bullet Train.
Posters updated?:
Cleaning lights on for the night?: Yes
Projection cart by entrance?: Yes
Additional Notes:
Comments
Post a Comment